Aesthetic Design in Practicality: Experience the Transparency of Water The three primary components of Pearl Airation are the acrylic tank, air pump, and light. The most important component is the tank. Given the large volume of water, the sleek shape and design, and the height of the installation, our primary challenge is ensuring the acrylic will be able to withstand the outward pressure of the water contained within.Our solution is to special order our acrylic material, also known as acrylic cast sheet or panels, manufactured here in Japan, and domestically assemble them one by one using solvent adhesives. Typically, as with most aquariums or water tanks, the panels would be made thick to withstand the pressure. However, given the aesthetic goals of Pearl Airation, we found an alternative solution in reinforcement ribbing. These thin panels are internally installed vertically along the width of the piece and not only provide greater support, but also act as corridors for the rising bubbles. All of the articulations between panels are meticulously examined and detailed to ensure there is no visible remnants of the adhesive. The final piece is always pristine and transparent. Custom logos, letters and shapes need to be determined prior to construction. They can be changed afterward but will require additional cost and maintenance time. Custom design rental pieces are also available for events and temporary needs. These additional systems (such as the magnetic lid that controls the ejection of bubbles) have specific lifespans and operating noise levels, making them more suitable for short-term rental use—such as temporary events or exhibitions to highlight products or booths—rather than for long-term use in commercial spaces.

Yes, but very rarely. We use “airation water” instead of regular tap water. This specialized water is highly resistant to decay and deterioration and therefore requires no replacement or external water supply. Over time, there will be some volume loss due to evaporation. As such, the only maintenance required is a periodic top-up of the Airation water. The power supply is any ordinary wall outlet.

Domestically, the lead time is 40 days.

The weekly lease generally starts from 250,000 JPY per panel. For purchase inquiries, please contact us directly.

Pear Aeration Panels: 1000mm (Width) × 3000mm (Height) Pillar Type: Standard height is up to 2000mm. However, it can be extended to 4000mm if the diameter is at 100mm.

No, it’s made of acrylic (as is the Aqua Wall Panel). Use soft cloths like microfibre when cleaning to avoid scratches.

While our specially made acrylic panels are highly resistant to sunlight and mold, We recommend using Aqpane and Pearl Airation as room partitions, not as load-bearing structures, exterior walls, or any components intended to secure access to a building. Each panel must be securely fixed at both the top and bottom to the ceiling and floor. While the panels are durable, they should not be used as structural elements, nor is it recommended to lean or apply heavy pressure on them.